
Course:	PennDOT H & H and Permitting Procedures
SAP Course Number:	78TECH400194

Require fiscal data at the course level?

Course can be found when searching
"By Topic" under these categories:

Highway Design
Hydraulics and Hydrology
Project Management
Structural Design

Class Schedule

No Offerings Are Currently Scheduled

Location	Start	End	Times
Webinar	10/03/23	10/05/23	Click class location for specific times.
Webinar	03/22/22	03/24/22	Click class location for specific times.
Webinar	01/12/21	01/14/21	Click class location for specific times.
Harrisburg (Cancelled)	06/17/20	06/19/20	Click class location for specific times.
Bridgeville	06/25/19	06/27/19	Click class location for specific times.
Harrisburg	04/02/19	04/04/19	Click class location for specific times.
Montoursville	02/26/18	02/28/18	Click class location for specific times.
Harrisburg	12/05/17	12/07/17	Click class location for specific times.
Allentown	05/17/17	05/19/17	Click class location for specific times.
Hanover Township	03/15/16	03/17/16	Click class location for specific times.
Harrisburg	09/09/14	09/11/14	Click class location for specific times.
Bridgeville	10/15/13	10/17/13	Click class location for specific times.
Harrisburg	01/22/13	01/24/13	Click class location for specific times.
Allentown	02/07/12	02/09/12	Click class location for specific times.
Hollidaysburg	05/24/11	05/26/11	Click class location for specific times.
Hollidaysburg (Cancelled)	02/01/11	02/03/11	Click class location for specific times.
Harrisburg	01/26/10	01/28/10	Click class location for specific times.
King of Prussia	09/15/09	09/17/09	Click class location for specific times.
Harrisburg	01/13/09	01/15/09	Click class location for specific times.
Indiana	06/03/08	06/05/08	Click class location for specific times.
Allentown	01/15/08	01/17/08	Click class location for specific times.
Harrisburg	08/06/07	08/08/07	Click class location for specific times.
Harrisburg (Cancelled)	07/10/07	07/12/07	Click class location for specific times.
Hollidaysburg	02/13/07	02/15/07	Click class location for specific times.
King of Prussia	11/07/06	11/09/06	Click class location for specific times.
Montoursville	10/24/06	10/26/06	Click class location for specific times.
Harrisburg	10/10/06	10/12/06	Click class location for specific times.
Indiana	09/12/06	09/14/06	Click class location for specific times.
Harrisburg	07/18/06	07/20/06	Click class location for specific times.

General Information

Summary:	This course focuses on requirements and design procedures for hydrology/hydraulics/permitting common to PennDOT bridge/culvert projects. The course introduces the new Design Manual 2, Chap. 10, and identifies significant revisions affecting design, permitting, and scoping projects with waterway structures. The course steps through the development of an H&H Report including the selection of the hydrologic and hydraulic methods, FEMA considerations, scour concerns, and permitting requirements.
Learning Outcomes:	Upon successful completion of this course, participants will be able to: -determine the applicable hydrologic and hydraulic methods for a project site; -locate and review FEMA Flood Insurance Studies and Maps to determine if a project site is located in a FEMA mapped area; -select the appropriate waterway permit for a project site; -identify the PennDOT requirements for an H&H Report;and -establish design discharge frequencies for PennDOT projects.
Prerequisites:	An attendee must have an understanding of basic engineering concepts.
Target Audience:	PennDOT and consultant project managers and design engineers who are responsible for the design and analysis of highway stream crossings, or engineers who review H&H Reports. The course is suitable for entry-level personnel and is a valuable refresher course for those with previous H&H experience. Project managers will gain valuable background on H&H and permitting that will be beneficial in the scoping and design phase of projects.

Special Materials:	Attendees should bring a copy of Design Manual-Part 2, Chapter 10 to the class. To get the most up-to-date version of DM2, Chapter 10, please refer to this link: ftp://ftp.dot.state.pa.us/public/Bureaus/design/PUB13M/insidecover.pdf
Final Exam:	Yes

Continuing Education Credits

Miscellaneous	CEHs	Classes After	CEUs	Classes After	PDHs	Classes After

PennDOT:					16.00	12/08/10

Awarding continuing education credits (PDH/CEU/CEH) to a training course or other training event does not imply or guarantee that the training course/event is approved by the Pennsylvania State Registration Board of Professional Engineers, Geologists and Land Surveyors. According to Pennsylvania Act 25, “Credit determination for activities…shall be the responsibility of the licensee. Continuing professional competency obtained by a licensee should maintain, improve or expand skills or knowledge obtained prior to initial licensure, including law and ethics applicable to the profession, or develop new and relevant skills and knowledge.”
For informational purposes only:	1 CEU is equal to 10 hours of instruction
	1 CEH is equal to 1 hour of instruction

Course Contact Information

For technical questions regarding this course, contact the following...
Name:	Kimberly Rice
Phone:	(717) 783-4722
Email:	kirice@pa.gov
For general questions about the Training Calendar (such as those regarding schedules, locations, instructors or registrations), see Contact Information in specific classes.

Created	Last Modified
By Steve A Davis/PennDOT On 05/11/06 At 07:51 AM	By Rhiannan Nearhood/PennDOT On 05/25/23 At 01:37 PM