Class Schedule General Information Continuing Education Credits Contact Us


Course:	ADA Curb Cut Ramps
SAP Course Number:	78TECH400013

Require fiscal data at the course level?

Course can be found when searching
"By Topic" under these categories:

Construction Inspection
Construction Management

Class Schedule

Location		Start		End		Times
Webinar		01/25/24		01/26/24		Click class location for specific times.
Webinar		02/15/24		02/16/24		Click class location for specific times.
Webinar		02/27/24		02/28/24		Click class location for specific times.

General Information

Summary:	Each attendee MUST be registered with their own email address. In compliance with the Americans with Disabilities Act (ADA) of 1990, PennDOT is designing and constructing thousands of ADA approved Curb Cut Ramps. To ensure uniformity in applying standards and criteria statewide, it is critical for Inspectors to be aware of, and meet, all PennDOT specifications and documentation requirements. Understanding and meeting these standards will guide Inspectors in the inspection of the installation.
Learning Outcomes:	-Describe how PennDOT achieves compliance with ADA law requirements regarding Curb Ramps. -Explain the roles and responsibilities of the Inspector in performing all duties associated with ADA Curb Ramp Inspection. -Identify resources to utilize when performing the inspections of the ADA Curb Cut Ramps. -Ensure all documentation is in place during the inspection process. -Correctly complete the CS-4401 Curb Ramp Inspection Form.
Target Audience:	This course is designed for new inspectors, new TCI’s and those inspecting the installation of curb cut ramps.

Final Exam:	Yes

Continuing Education Credits

Miscellaneous	CEHs	Classes After		CEUs	Classes After		PDHs	Classes After

PennDOT:							7.50	01/11/12

Awarding continuing education credits (PDH/CEU/CEH) to a training course or other training event does not imply or guarantee that the training course/event is approved by the Pennsylvania State Registration Board of Professional Engineers, Geologists and Land Surveyors. According to Pennsylvania Act 25, “Credit determination for activities…shall be the responsibility of the licensee. Continuing professional competency obtained by a licensee should maintain, improve or expand skills or knowledge obtained prior to initial licensure, including law and ethics applicable to the profession, or develop new and relevant skills and knowledge.”
For informational purposes only:	1 CEU is equal to 10 hours of instruction
	1 CEH is equal to 1 hour of instruction

Course Contact Information

For technical questions regarding this course, contact the following...
Name:	Virginia Lawson
Phone:	(717) 346-1375
Email:	vilawson@pa.gov
For general questions about the Training Calendar (such as those regarding schedules, locations, instructors or registrations), see Contact Information in specific classes.

Created	Last Modified
By Kathleen E Baddick/PennDOT On 01/11/12 At 09:44 AM	By Rhiannan Nearhood/PennDOT On 11/03/23 At 01:27 PM