Independent Study

           
 
 General Information                            Continuing Education Credits                            Contact Us 


Course:
CMP-CSI L1 Introduction and Overview

SAP LSO Course Code:
78TECH401060

Course can be found when searching
"By Topic" under these categories:


Construction Inspection
Construction Management
Environmental




Description:
Lesson 1 - Introduction and Overview - provides and introduction to the training module for Construction Stormwater Inspections (CSI) that PennDOT performs as part of its Compliance Management Program (CMP). It is mandatory for construction inspectors who perform visual site inspections of erosion and sediment pollution control measures on projects that require coverage under a National Pollutant Discharge Elimination System (NPDES) Permit for Discharges of Stormwater Associated with Construction Activities.

Course Type Objectives Upon successful completion of this course, the learner will be able to:
Understand the purpose and learning outcomes of the overall CMP-CSI training module.

Important Information:
In order to receive credit for completion of the lesson, the participant must successfully answer one or more questions at the end of the lesson and (for consultants) follow instructions to submit their results to PennDOT.


Link to this Training:
CMP-CSI L1 Introduction and Overview

Continuing Education Credits


Miscellaneous
CEHs
Classes
After
 
CEUs
Classes
After
 
PDHs
Classes
After
 
PennDOT:
0.50
02/07/20
 

Awarding continuing education credits (PDH/CEU/CEH) to a training course or other training event does not imply or guarantee that the training course/event is approved by the Pennsylvania State Registration Board of Professional Engineers, Geologists and Land Surveyors.

According to Pennsylvania Act 25, “Credit determination for activities…shall be the responsibility of the licensee.  Continuing professional competency obtained by a licensee should maintain, improve or expand skills or knowledge obtained prior to initial licensure, including law and ethics applicable to the profession, or develop new and relevant skills and knowledge.”

For informational purposes only:1 CEU is equal to 10 hours of instruction
1 CEH is equal to 1 hour of instruction


Contact Information


Name:
Jonie L Buggy
Phone:
(717) 409-3993
Email:
jbuggyz@pa.gov



Created
Last Modified
By Daniel E Sanchez/PennDOT
On 02/06/20 At 12:49 PM
By Daniel E Sanchez/PennDOT
On 02/12/20 At 12:51 PM