Course:	CMP-CSI L9 Compliance Management Program
SAP LSO Course Code:	78TECH401068

Course can be found when searching "By Topic" under these categories:

Construction Inspection Construction Management Environmental

Description:	Lesson 9 - Compliance Management Program - covers the core components of PennDOT's Compliance Management Program (CMP), including: the Consent Agreement between PennDOT and EPA; the Stormwater Self-Audit Program; and the Compliance Response Policy (for addressing deficiencies found during construction stormwater inspections). This is the ninth in a series of lessons in the training module for Construction Stormwater Inspections (CSI) that PennDOT performs as part of its Compliance Management Program (CMP). It is mandatory for construction inspectors who perform visual site inspections of erosion and sediment pollution control measures on projects that require coverage under a National Pollutant Discharge Elimination System (NPDES) Permit for Discharges of Stormwater Associated with Construction Activities. Course Type Objectives Upon successful completion of this course, the learner will be able to: - Describe the genesis of the EPA Consent Agreement and the requirements outlined in it. - Identify the types, frequencies, and responsibilities of inspections in PennDOT's Stormwater Self-Audit Program. - Distinguish between the different categories of E&S deficiencies. - Understand the timeframes to correct problems and remedies for a contractor's failure to address deficiencies in a timely manner.
Link to this Training:	CMP-CSI L9 Compliance Management Program

Miscellaneous	CEHs	Classes After		CEUs	Classes After		PDHs	Classes After
PennDOT:							1.00	02/07/20

Awarding continuing education credits (PDH/CEU/CEH) to a training course or other training event does not imply or guarantee that the training course/event is approved by the Pennsylvania State Registration Board of Professional Engineers, Geologists and Land Surveyors. According to Pennsylvania Act 25, “Credit determination for activities…shall be the responsibility of the licensee.  Continuing professional competency obtained by a licensee should maintain, improve or expand skills or knowledge obtained prior to initial licensure, including law and ethics applicable to the profession, or develop new and relevant skills and knowledge.”
For informational purposes only:	1 CEU is equal to 10 hours of instruction
	1 CEH is equal to 1 hour of instruction

Name:	Jonie L Buggy
Phone:	(717) 409-3993
Email:	jbuggyz@pa.gov