
Course:	Erosion and Sedimentation Plan Standards - Webinar
SAP Course Number:	78TECH400165

Require fiscal data at the course level?

Course can be found when searching
"By Topic" under these categories:

Geotechnical and Foundations
Highway Design
Hydraulics and Hydrology

Class Schedule

No Offerings Are Currently Scheduled

General Information

Summary:	An Erosion and Sediment Control (E&S) Plan is required for almost every PennDOT project involving earthwork. The E&S Plan is the least consistent of the Supplemental Plans because it is influenced by outside agencies and limited guidance is available on presentation. In addition, the E&S Plan is the most common source of technical deficiencies for PennDOT waterway permit and NPDES permit applications. This one-hour webinar describes the standards that should be applied to PennDOT E&S Plans and highlights common errors. The sources for plan notes and details, proper sequencing of best management practice (BMP) installation and removal, and overall presentation will be discussed. Common mistakes and the draft PennDOT E&S Plan checklist will also be discussed in the presentation.
Learning Outcomes:	Upon successful completion of this course, the attendee will be able to: •Identify the sources for PennDOT E&S Plan standards. •Distinguish between items required on the E&S Plan and items that are sometimes unnecessarily included on the plan. •Avoid common errors that are most often commented on by agencies reviewing the plans.
Outline:	Instructions to Self Book in ESS.pdf
Teaching Method:	This class can be booked as a self study in ESS.
Target Audience:	Project Managers, Plans Engineers and Designers and anyone interested in learning about the E & S Plan Standards. (However, since this is being developed as a Highway Administration Webinar, the audience is also licensees in PennDOT from the DE level to the Project Manager and others’ levels).

Final Exam:	No

Continuing Education Credits

Miscellaneous	CEHs	Classes After	CEUs	Classes After	PDHs	Classes After

PennDOT:					1.00	07/08/11

Awarding continuing education credits (PDH/CEU/CEH) to a training course or other training event does not imply or guarantee that the training course/event is approved by the Pennsylvania State Registration Board of Professional Engineers, Geologists and Land Surveyors. According to Pennsylvania Act 25, “Credit determination for activities…shall be the responsibility of the licensee. Continuing professional competency obtained by a licensee should maintain, improve or expand skills or knowledge obtained prior to initial licensure, including law and ethics applicable to the profession, or develop new and relevant skills and knowledge.”
For informational purposes only:	1 CEU is equal to 10 hours of instruction
	1 CEH is equal to 1 hour of instruction

Course Contact Information

For technical questions regarding this course, contact the following...
Name:	Jonie L Buggy
Phone:	(717) 409-3993
Email:	jbuggyz@pa.gov
For general questions about the Training Calendar (such as those regarding schedules, locations, instructors or registrations), see Contact Information in specific classes.

Created	Last Modified
By Daniel E Sanchez/PennDOT On 07/08/11 At 02:48 PM	By Daniel E Sanchez/PennDOT On 07/25/13 At 01:30 PM