Course:	CMP-CSI L5 ESPC Plans
SAP LSO Course Code:	78TECH401064

Course can be found when searching "By Topic" under these categories:

Construction Inspection Construction Management Environmental

Description:	Lesson 5 - ESPC Plans - explains the various parts of the Erosion and Sediment Pollution Control (ESPC) Plan and how to find information needed to perform inspections . This is the fifth in a series of lessons in the training module for Construction Stormwater Inspections (CSI) that PennDOT performs as part of its Compliance Management Program (CMP). It is mandatory for construction inspectors who perform visual site inspections of erosion and sediment pollution control measures on projects that require coverage under a National Pollutant Discharge Elimination System (NPDES) Permit for Discharges of Stormwater Associated with Construction Activities. Course Type Objectives Upon successful completion of this course, the learner will be able to: - Understand the basic components and layout of an ESPC Plan for Department projects. - Utilize the drawing details and plan views to verify proper installation of E&S controls. - Identify the project's limits of disturbance and the NPDES Permit boundary. - Locate the waste disposal instructions on the plan. Important Information: In order to receive credit for completion of the lesson, the participant must successfully answer one or more questions at the end of the lesson and (for consultants) follow instructions to submit their results to PennDOT.
Link to this Training:	CMP-CSI L5 ESPC Plans

Miscellaneous	CEHs	Classes After		CEUs	Classes After		PDHs	Classes After
PennDOT:							0.50	02/07/20

Awarding continuing education credits (PDH/CEU/CEH) to a training course or other training event does not imply or guarantee that the training course/event is approved by the Pennsylvania State Registration Board of Professional Engineers, Geologists and Land Surveyors. According to Pennsylvania Act 25, “Credit determination for activities…shall be the responsibility of the licensee.  Continuing professional competency obtained by a licensee should maintain, improve or expand skills or knowledge obtained prior to initial licensure, including law and ethics applicable to the profession, or develop new and relevant skills and knowledge.”
For informational purposes only:	1 CEU is equal to 10 hours of instruction
	1 CEH is equal to 1 hour of instruction

Name:	Jonie L Buggy
Phone:	(717) 409-3993
Email:	jbuggyz@pa.gov